Advantech
Embedded Computing Group introduces a new data storage solution,
DiskOnChip IDE Pro from M-Systems. The DiskOnChip IDE Pro is a
flash disk with an IDE interface. It combines advanced and proven
DiskOnChip technology with a standard IDE interface to complement
the DiskOnChip product line.
Main
Features
Simple, scalable
and ready to run, DiskOnChip IDE Pro features easy plug and play
integration, great performance and high reliability. It offers
built-in block device emulation, and needs no software driver.
DiskOnChip IDE Pro complements the DiskOnChip product family of
products well. It fits into any platform that has an IDE connector.
The advantages are:
Easy
Integration - Just plug in the DiskOnChip IDE Pro and start
working.
High
Performance - Extremely fast read & write rates for
transparent hard-drive emulation.
Scalable
- Provides a convenient upgrade path and flexible design.
Highly
Reliable - Automatically detects up to 2 bits and corrects
1 bit per 512 bytes.
No Driver
Needed - Works with any OS.
Supports
all IDE Modes - For new and older platforms. Supports two
device connections per bus.
The DiskOnChip IDE Pro integrates an IDE controller and flash
device. Communication with the host occurs through the host interface,
using standard ATA protocol. Communication with the flash device(s)
occurs through the flash interface. Below is the DiskOnChip IDE
Pro block diagram for reference. (Click
here for large view of block diagram)
Compatibility
All DiskOnChip
IDE Pro versions are compatible with one another. Capacities can
be upgraded with no change to the basic design using the same
IDE connector type.
DiskOnChip
IDE Pro products are obviously not compatible with other DiskOnChip
products, due to the different form factors and drivers.
Availability
DiskOnChip
IDE Pro will be available in the following form factors and capacities:
Product
IDE
Connector Type
Capacity
(MB)
DiskOnChip
IDRE Pro, Operating Voltage: 5 V
40-pin
16
32
64
128
44-pin
16
32
64
128
The DiskOnChip IDE Pro will be ready for orders starting April
1, 2002. Please contact your Advantech sales representative or
epc@advantech.com or visit
the IDE Pro web page on M-Systems web site (www.m-sys.com)
for any further information or assistance.